Papers Published, Communicated for Publication in International/National Journals:
[1]     Gupta P., Singh J., and Singh I.P., ‘‘Behavioral Analysis of Duplex Casting System under Preventive Resume Priority Repair Discipline a Case Study’’, Industrial Engineering Journal Vol. XXXIII No.12, December 2004, ISSN 0970-2555.
[2]     Gupta P., Singh J., and Singh I.P., ‘‘Maintenance Planning based on Performance Analysis of 7-out-of-14: G Chemical-system: a Case Study,’’ International Journal of Industrial Engineering Theory Applications and Practice,  ISSN 1943-670X, 12(3), pp 264-274, 2005, (WoS, SCIE, Impact Factor: 0.537)
[3]        Gupta P., Singh J., and Singh I.P., ‘‘Mission Reliability and Availability Prediction of Flexible Polymer Powder Production System’’, OPSEARCH, Vol.42, No. 2, 2005. (Scopus, WoS, ESCI)
[4]        Gupta P., and Gupta A., ‘‘Availability improvement of a production system under preventive maintenance’’, Industrial Engineering Journal, ISSN 0970-2555, Vol. XXXV No.8, August 2006.
[5]        Goyal A., Sharma S.K., Gupta P. ‘‘Availability Analysis of a Part of Rubber Tube Production system under Preemptive Resume Priority Repair’’, International Journal of Industrial Engineering Theory Applications and Practice, 16(4), 260-269, December 2009. (WoS, SCIE, Impact Factor: 0.537)
[6]        Gupta P., Modgil V., and Goyal A., ‘‘Performance Analysis of the Yarn Production subsystem a part of Carded Yarn Manufacturing Plant – A case study’’, Journal of Mathematics and Systems Sciences, Vol. 5, No. 2, December 2009 (ISSN: 0975-5454).
[7]     Goyal A., Sharma S.K., Gupta P. ‘‘System Modeling and Behanioral Analysis of Biscuit Baking System-A Part of Biscuit Manufacturing System’’, Industrial Engineering Journal, ISSN 0970-2555, 2009.
[8]     Goyal A., Sharma S.K., Gupta P. ‘‘Performance Modeling and Availability study Rubber Tube Extraction System under Preemptive Resume Priority Repair’’, Udyog Pragati – The Journal for
            Practicing Managers, ISSN 0970-3365, Vol. 34, No.1, January – March, 2010.      
[9]        Jayant A., kumar S., Gupta P. and Garg S.K., “Supply Chain Management: An Integrated Approach for Performance Improvement –A Case of Manufacturing Unit”, Journal of IMS Group Vol.07, Jan-June2010, pp 82-97.ISSN: 0973-824X.
[10]    Kumar V., Madan J., and Gupta P. “Cavity Layout Design Methodology for Diecasting             Dies” International Journal of Engineering Studies, ISSN 0975 – 6469, 2:3, pp 263-270,      November 2010. 
[11]    Goyal A., Sharma S.K., Gupta P. and Singhal S. ‘‘Availability prediction for the soap noodle
             making system – A case study’’, International Journal of Engineering Studies, ISSN 0975 – 
            6469, November 2010. 
[12]   Jayant A., Kumar S., Gupta P. and Garg S.K. , “Perspectives in Reverse Supply Chain           Management: A state of the Art  Literature Review”, Jordan Journal of Mechanical and Industrial          Engineering (JJMIE), Volume 6, Number 1, pp-87-102. Feb.2012, ISSN 1995-6665.Feb. 2012.[ IF 0.17]
[13]    Goyal A. and Gupta P. ‘‘Performane Evaluation of a Multi-State Repairable Production System – A Case Study’’, International Journal of Performability Engineering, Vol. 8, No. 3, ISSN  09731318, pp 330-338. May, 2012.
[14]     Kumar V., Madan J. and Gupta P. “System for computer aided Cavity Layout Design for
        Diecasting Dies” International Journal of Production Research, Vol. 50, No. 18, ISSN            0020 – 7543, pp 5181-5194, April 2012.  (SCI, WoS, I.F: 1.477, Thomson Ruter)
[15]   Gupta P., Khanna R. and Gupta R., ‘‘Effect of Process Parameters on Kerf Width in         WEDM for HSLA using Response Surface Methodology’’, Journal of Engineering and       Technology,  ISSN:0976-8580, Volume 2, Issue 1, pp 1-6, Jan-June 2012.
[16]  Jayant A., Patel V., Gupta P. and Garg S.K.,‘‘ Implementation of Supply Chain         Management in an Automobile Company: A case study’’, Indore Management Journal,       ISSN: 0975-1653, Vol. 3, Spl. Issue 2 Vol. 3, Spl. Issue 2, pp 90-104, 2012.
[17]    Kumar V., Madan J. and Gupta P. “A System for Design of Multi-Cavity Die Casting Dies       from Part Product Model” International Journal of Advanced Manufacturing Technology, ISSN 2083-2107, Vol. 67, 9-12, Nov. 2012. (Scopus, SCIE, IF 2.952) 
[18]    Jayant A., Gupta P. and Garg S.K “Reverse Logistics: Perspectives, Empirical Studies and
            Research Directions”, International Journal of Industrial Engineering Theory Application and Practice, ISSN 1943-670X, 2012. (WoS, SCIE, Impact Factor: 0.537)
[19]    Jayant A., Gupta P. and Garg S.K., “Closed Loop Supply Chain for Spent batteries: A          Simulation Study”, International Journal of Advanced Manufacturing Systems (IJAMS),   
            ISSN: 2229 – 5860, Volume 3, No.1, 2012. (Scopus and WOS)
[20]    Bhagi L.K., Gupta P., Rastogi V., ‘‘Fractographic investigations of the failure of L-1 low pressure steam turbine blade Reference: CSEFA15’’ Case Studies in Engineering Failure         Analysis (Elsevier), ISSN: 2213-2902, Vol. 1, pp. 72-78, 2013.
[21]     Harsh Harit , Pardeep Gupta and S. C. Gupta, ‘‘Energy and Cost Analysis in Pulp and Paper Industry by Auditing Techniques: A Case Study’’, International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 5 (2013), pp. 619-624.
[22]    Bhagi, L. K., Gupta, P. and Rastogi, V., (2013), “Fractographic investigations of the failure     of L-1 low pressure steam turbine blade”, Journal Case Studies in Engineering Failure     Analysis, 1 (2), pp. 72-78. (Source Normalized Impact per Paper (SNIP): 1.751 and SCI mago Journal Rank (SJR): 0.616)

[23]      Vardhan S. & Gupta P., “Study on the implementation of Kobestu Kaizen (KK) Pillar of TPM in a Process industry,’’Applied Mechanics and Materials, ISSN 1660-9336, Vol. 592-594, pp 2694-2698, 2014.
[24]    Gupta P., Vardhan S., Sharma A., “The Impact of Implementation of Jishu-Hozen Pillar in          an Industry: A Case Study”, Journal of Sustainable Manufacturing and Renewable Energy, Nova Science Publishers, ISSN: 2153-6821, Volume 3 Issue 1-2, 2015.
[25]    Gupta P., Vardhan S., Sharma A., “Organizational motivation to achieve manufacturing       excellence through TPM in an automobile industry”, Journal of Mechatronics and        Intelligent Manufacturing, Nova Science Publishers, ISSN:  1949-4904, Volume 3 Issue 3-4, 2015.
[26] Gupta P., Vardhan S., “Optimizing OEE, productivity and production cost for improving        sales volume in an automobile industry through TPM: A case study”, International        Journal of Production Research Vol. 50, No. 18, ISSN 1365 – 588X (online), DOI: 10.1080/00207543.2016.1145817 (SCI, WoS, I.F: 1.477, Thomson Ruter)
[27]   Bhagi, L. K., Gupta, P. and Rastogi, V., (2016), “Study of corrosive fatigue and life      enhancement of low pressure steam turbine blade using friction dampers”, Journal of      Mechanical Science and Technology, Vol. 31, issue 1. (SCI Impact Factor 0.761, Thomson Reuter)
[28]  Gupta P., Vardhan S., Haque M.S.A., “Study of Success Factors of TPM Implementation
           in Indian Industry towards Operational Excellence: An Overview”, Proceedings of International Conference on Industrial Engineering and Operations Management (IEOM-2015), Dubai, March 3-5, 2015. (SCOPUS Indexed)
[29]    Vardhan S., Gupta P., Gangwar V., “The Impact of Quality Maintenance Pillar of TPM on           Manufacturing Performance”, Proceedings of International Conference on Industrial Engineering and Operations Management (IEOM-2015), Dubai (UAE), March 3-5, 2015. (SCOPUS Indexed).
 [30]     Sunil Kumar, Vikas Rastogi and Pardeep Gupta, “A hybrid impedance control scheme for underwater welding robots with a passive foundation in the controller domain”, Simulation:  transactions of the Society for Modeling and Simulation International, Vol. 93(7) 2017 619–630. eISSN: 17413133, pISSN: 00375497, Impact Factor: 0.640, 2016 of Journal Citation Reports       
[31]      Sunil Kumar, Vikas Rastogi, Pardeep Gupta, “Recent Developments in Modeling and Control of Underwater Robot Manipulator: A Review”, Indian Journal of Science and Technology, Vol 9(48) 2016 pp. 1-8. Print ISSN: 0974-6846, Online ISSN: 0974-5645. (SJR 0.27, SCIE, WoS)
[32]      Sunil Kumar, Aarti Gupta and Pardeep Gupta, “Some Investigations to Improve the Wear Resistance & Hardness of an Aluminium Alloyed Piston by Addition of Zinc” International Journal of New Technologies in Science and Engineering, Vol. 3, Issue 3, 2016, pp. 11-20, ISSN 2349-0780.
[33]      Rahul Gupta, Pardeep Gupta (2018), “Fabrication of Μicro-Channels on Pure-Ti by USM and Its Surface Roughness Analysis”, Ciencia e Tecnica, Vitivinicola, Vol. 33 (n. 7, 2018) pp. 92-97. ISSN: 0254-0223. (WoS, SCIE, I.F. = 1.067)
[34]      Gupta P., Hooda A., (2019) “Manufacturing Excellence through Total Productive Maintenance Implementation in an Indian Industry: A Case Study”, International Journal of Mechanical and Production Engineering, Research and Development, ISSN (ONLINE): 2249-8001, Issue-3, Edition-June, 2019 (SCOPUS Indexed).
[35]      Rahul Dev Gupta, Pardeep Gupta (2019). Fabrication of µ-Channels on Pure-Ti using USM and Optimization of Process Parameters, International Journal of Recent Technology and Engineering (IJRTE), ISSN: 2277-3878, Vol. 8 Issue-2, July 2019, pp. 6508-6515. Publisher: Blue Eyes Intelligence Engineering and Sciences Publication; ISSN: 2277-3878. (Scopus Indexed)
[36]      Upender Dhull & Pardeep Gupta (2019). Performance and Emission testing of Diesel Engine using blends of Biodiesel from Castor Oil and Neem Oil prepared using Lithium Doped CaO Nano-Catalyst. Springer Proceeding Lecture Notes in Mechanical Engineering, 4th International conference on “Emerging Trends in Mechanical and Industrial Engineering” organised by Northcap University Gurgaon from 10 to 11 October, 2019. (Scopus indexed)
[37]      Pardeep Gupta & Ankesh Mittal (2020). Identifying the most influencing success factors  of TQM implementation in manufacturing industries using Analytical Hierarchy Process, Proceedings of the International Conference on Industrial Engineering and Operations Management Dubai, UAE, March 10-12, ISSN: 2169-8767 ISBN: 978-1-5323-5952-1, pp. 481-494. (Scopus Indexed)
[38]      Ankesh Mittal, Pardeep Gupta,& Manjot Singh (2020). To Investigate the Relationship between TQM Enablers Applicable In Indian Engineering Educational Institutes. Proceedings of the International Conference on Industrial Engineering and Operations Management Dubai, UAE, March 10-12, ISSN: 2169-8767 ISBN: 978-1-5323-5952-1, pp. 541-552. (Awarded Best Track Paper, Scopus Indexed) 
[39]      Gupta, R.D., Gupta, P. and Khanna, R. (2020). Parametric optimization of USM parameters by Taguchi and NSGA-II for the development of µ-channels on pure titanium. Grey Systems: Theory and Application, ISSN: 2043-9377, Vol. 10 No. 2, pp. 173-192. https://doi.org/10.1108/GS-01-2020-0007 (Publisher: Emerald Publishing Limited, ESCI Indexed Journal, I.F.2.268 Clarivate Anlytics, 2019)
[40]      Pardeep Gupta & Sachit Vardhan (2020). Impact of implementing TPM Based Tool Cost Management Approach in Indian Manufacturing Industry, Int. J. of Services and Operations Management, InderScience Publishers (Accepted for publication Jan, 2020) (Scopus Indexed) 
[41]      Upender Dhull & Pardeep Gupta (2020). Hybrid Response Surface Method-African Buffalo Optimization Technique for Ultrasonic Production of Biodiesel from Waste Cooking Oil using Li doped CaO Nanocatalyst, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Vol. 9, Issue 5, pp. 1938-1947, March 2020. (Scopus indexed)
[42]  Upender Dhull & Pardeep Gupta (2020). Composite approach of RSM-ABO for optimization of production of Ricinus Communis biodiesel using Lithium doped CaO Nanocatalyst. International journal of advances in Science and Technology, ISSN: 2005-4238, Vol. 29, No. 5, (2020), pp. 5555 – 5570. (Scopus indexed, Publisher: Science and Engineering Research Support Society, SJR 0.11)
[43]  Kumar, U., Gupta, P. (2020). Modeling and optimization of novel biodiesel production from non-edible oil with musa balbisiana root using hybrid response surface methodology along with african buffalo optimization. Reac Kinet Mech Cat (2020), ISSN: 1878-5204 (Online). https://doi.org/10.1007/s11144-020-01807-7 (SCI, SPRINGER, I.F. 1.428, Published 17.06.2020)
[44]      Kumar, S. and Gupta, P. (2020). Case Study on Business Excellence Issues of an Indian Automobile Manufacturer using SAP-LAP Framework. International Journal on Emerging Technologies, 11(3), pp 911–918, ISSN No. (Print): 0975-8364 ISSN No. (Online): 2249-3255. (Scopus Indexed)

[45]      Pardeep Gupta and Ankesh Mittal (2020), Exploring the Business Challenges and Techniques used for Improving Customer Satisfaction through TQM: An Empirical study, Journal of Advanced Manufacturing Systems (Accepted for publication dated 19.09.2020, WoS/ESCI/scopus, I.F. = 1.26 SJR)

[46]      Kumar, S. and Gupta, P. (2020). Case Study on Business Excellence Issues of an Indian Automobile Manufacturer using SAP-LAP Framework. International Journal on Emerging Technologies, 11(3), pp 911–918, ISSN No. (Print): 0975-8364 ISSN No. (Online): 2249-3255. (Scopus Indexed)
[47]      Pardeep Gupta and Niharika Gupta (2021), Improving Organizational Performance through TQM in an Indian Manufacturing Industry: An Empirical Study, Int. J. of Productivity and Quality Management (Accepted dated 27.01.2021, Scopus Indexed, Inderscience Publications)
[48]      Ankesh Mittal and Pardeep Gupta (2021), Effect of TQM Practices on organizational performance: A case study of Deming awarded Indian industry, Int. J. of Business Excellence (Accepted for publication dated 15.01.2021, Scopus Indexed, Inderscience Publications)
[49]      Pardeep Gupta and Ankesh Mittal, Realizing Leadership in Indian Market by Deming Awarded Original Equipment Manufacturing Industry through TQM, Int. J. of Services and Operations Management (Accepted for publication dated 19.01.2021, Scopus Indexed, Inderscience Publications)

[50]   Pardeep Gupta and Ankesh Mittal (2020), Exploring the Business Challenges and Techniques used for Improving Customer Satisfaction through TQM: An Empirical study, Journal of Advanced Manufacturing Systems (Accepted for publication dated 19.09.2020, WoS/esci/scopus)