Dr. Nikhilesh Singh
Assistant Professor
Mechanical Engineering
NA
nikhileshsingh@sliet.ac.in
1. Ph.D. (Materials Science) from PEC Chandigarh (with 9.67 CGPA).
2. M.E. (Production Engineering) from PEC Chandigarh (Batch Topper).
3. B.Tech. (Mechanical Engineering) from IKGPTU Jalandhar-Punjab (Gold Medalist).
1. Sant Longowal Institute of Engineering and Technology, Longowal, Punjab. (Since 2022-Till date)
2. CGC, College of Engineering, Landran, Punjab.
3. Chandigarh University, Gharuan, Punjab.
Book Chapters:
1. N Singh, RM Belokar, and RS Walia (2022), “Robust Comparison of Al/Mg alloys based Hybrid Metal Matrix Composites- A Review”. Modern Manufacturing Systems: Trends and Developments (Series: Frontiers of Mechanical and Industrial Engineering), AAP-CRC Press (Taylor & Francis Group); 179-92, eBook ISBN: 9781003284024.
2. Gagandeep, N Singh, A Charak, M Tyagi, RS Walia (2022). “Effect of IoT in Supply Chain Management-A Review”. Recent Advances in Operations Management Applications: Lecture Notes in Mechanical Engineering (Springer, Singapore); 283-97, Print ISBN: 978-981-16-7058-9.
Member of the Society of Manufacturing Engineers (SME) during 2010-2012.
1. GATE Qualified (5 Times).
2. MHRD scholarship during M.E. course in the year 2010-2012.
3. MHRD scholarship during Ph.D. course in the year 2018-2022.
4. Won Best Paper Award at NIT Jalandhar in the year 2020.
5. Delivered expert lecture on “Development and Applications of Advanced Materials in Innovative Engineering” organized by CUIET, Chitkara University on 22/09/2023 at Rajpura (Punjab)-India.
a) Journals:-
1. N Singh, & Deepika, “Mechanical-Tribo-Philosophies of Advanced Stir-Casted Al-7075(T6) based Hybrid Composite Embedded with Si3N4+MoS2 and TiB2+MoS2: A Neoteric Comparative Experimentation”, Journal of Materials Engineering and Performance, 2024.
2. N Singh, & Deepika, “Empirical Investigation on Controlled Porosity level and Dry Sliding Wear Behaviour of Al7075-(T6) Doped with SiC+MoS2 based Hybrid Composites via Advanced Vacuum-Assisted Stir Casting”, Proceedings of the Institution of Mechanical Engineers-Part C: Journal of Mechanical Engineering Science, 2024.
3. N Singh, & Deepika, “Morphological and Mechanical Behaviour of Novel Al7075(T6)+3.5%SiC+0.3%CR+5.5%MoS2 based Green Hybrid Composite: An Experimental Analysis and Optimization via TOPSIS”, Proceedings of the Institution of Mechanical Engineers-Part E: Journal of Process Mechanical Engineering, 2023.
4. N Singh, & Deepika, “Tribological Properties of Novel Al7075(T6)-SiC-Crumb rubber-MoS2 based Hybrid Composites: An Experimental Approach towards Green Revolution”, Proceedings of the Institution of Mechanical Engineers-Part L: Journal of Materials: Design and Applications, 2023.
5. N Singh, Deepika, RM Belokar, & RS Walia, “Experimental Probe on Machining Attributes of Al7075-T6/SiC/CR/MoS2 based Green Hybrid Composite using Artificial Neural Network (ANN) Model”, Proceedings of the Institution of Mechanical Engineers-Part E: Journal of Process Mechanical Engineering, 2022.
6. N Singh, RM Belokar, & RS Walia, “Fabrication and Mechanical Characterization of Al7075-T6/SiC/Gr/S-glass fiber Particulate Reinforced Hybrid Metal Matrix Composite using Vacuum Sealed Stir Casting Technique”, Transactions of the Indian Institute of Metals, 2022.
7. N Singh, RM Belokar, & RS Walia, “Experimental Investigation on Microstructural and Mechanical Attributes of Al 7075-T6/SiC/CR/MoS2 Based Green Hybrid Composite Via Advanced Vacuum-Sealed Bottom Pouring Stir Casting”, Silicon, 2021.
8. N Singh, RM Belokar, & RS Walia, “A Critical Review on Advanced Reinforcements and Base Materials on Hybrid Metal Matrix Composites”, Silicon, 2020.
9. N Singh, RM Belokar, RS Walia & A Rathee, “Parametric Study of Eco-friendly Reinforcements on Aluminium based Hybrid MMC using Taguchi Approach”, Advances in Materials and Processing Technologies, 2022.
10. N Singh, RM Belokar, & RS Walia, “Implementation of robust Taguchi approach on mechanical and metallurgical characterization of Al7075(T6)-SiC-MoS2 based hybrid metal matrix composite”, Materials Today: Proceedings, 2021.
11. N Singh & RM Belokar, “Tribological behavior of aluminum and magnesium-based hybrid metal matrix composites: A state-of-art review”, Materials Today: Proceedings, 2020.
12. N Singh, “Influence of Stir Casting Technique on HMMCs- A Literature Survey”, Journal of Emerging Technologies and Innovative Research, ISSN: 2349 – 5162, Volume-7, Issue-6, 2020.
13. N Singh, RM Belokar, & RS Walia, “Physiological evaluation of manual lifting tasks on Indian male workers”, International Journal of Engineering and Advanced Technology, ISSN: 2249 – 8958, Volume-2, Issue-1, 2012.
b) National/International Conferences Presentations:-
1. N Singh, & Deepika, “Microstructural and Mechanical Aspects of Varying SiC Particles Embedded on Al-7075(T6) based Stir-Casted Composite: An Experimental Approach”, National Conference on Advanced & Emerging Materials for Technological Applications (AEMTA-2024), organized by SLIET Longowal, India on March 15-16, 2024.
2. N Singh, RM Belokar, & RS Walia, “Implementation of robust Taguchi approach on mechanical and metallurgical characterization of Al7075(T6)-SiC-MoS2 based hybrid metal matrix composite”, 1st International Conference on Applied Research and Engineering (ICARAE-2021), organized by Cape Peninsula of Technology, Cape Town, South Africa on November 26-28, 2021.
3. N Singh, RM Belokar, RS Walia & A Rathee, “Parametric Study of Eco-friendly Reinforcements on Aluminum based Hybrid MMC using Taguchi Approach”, 2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021), organized by PEC Chandigarh, India (under TEQIP-III) on November 11-13, 2021.
4. N Singh & RM Belokar, “Tribological behavior of aluminum and magnesium-based hybrid metal matrix composites: A state-of-art review”, 11th International Conference on Materials Processing and Characterization (ICMPC-2020), organized by IIT Indore, India on December 15-17, 2020.
5. N Singh, RM Belokar, & RS Walia, “Robust Comparison of Al/Mg alloys based Hybrid Metal Matrix Composites- A Review”, International Conference on Industrial and Manufacturing Systems (CIMS-2020), organized by NIT Jalandhar, India (under TEQIP-III) on October 09-11, 2020.
6. N Singh, “A Review on the Evaluation of Aluminium based Hybrid Metal Matrix Composites”, 2nd International Conference in Advances on Mechanical Engineering and Nanotechnology (ICAMEN-2020), jointly organized by Manipal University Jaipur (Rajasthan) and NIT Uttarakhand, India (under TEQIP-III) on February 28-29, 2020.
Copyright © 2024 , Sant Longowal Institute of Engineering and Technology, Longowal - 148106 Distt. Sangrur, Punjab, India Developed & Maintained by Administrative Computer Services System (A.C.S.S), SLIET