Dr. Indraj Singh
Professor
Mechanical Engineering
+1672-253346
+1672-253590
9417460331
indrajsliet@yahoo.co.in
B.E., 1996, (DEI), Dayal Bagh, Agra.
M.Tech, 2007, PTU, Jalandhar.
PhD, 2016.
Certified Energy Auditor, 2010, (Bureau of Energy Efficiency) Ministry of Power,Govt. of India).
M.Tech & PhD Guided-24
1. Loveleen Kumar Bhagi, PG/ME/9304/07, A study on process parameters optimization in the friction welding of Dissimilar metals using Taguchi methodology.
2. Santosh Kumar, PG/ME/9306/07, Optimization performance measures during the Machining of Hybrid metal matrix composite using DOE
3. Dheeraj Bagga, PG/ME/098316, Optimization of paint process parameters in the painting of Tractor bonnet using response surface methodology.
4. Amit Moray, PGMSE/108328, Influence of cutting parameters on MRR & Surface roughness in face milling operation.
5. Inderpal Sharma, PGMSE116032, Experimental investigation into Electric Discharge Machining (EDM) of nickel based alloy Monel 400.
6. Anupam Tiwari, PGMES/136002, Analysis of the Influence of EDM Parameters on Performance characteristic of Inconel 825.
7. Vishal Kumar Dinkar, PG-MSE-126111, Optimization of electric discharge machining process parameters using Inconel-690.
8. Vipul Kumar, PGMSE/1456022, An Experimental Analysis & Optimization of process parameters in Wire-EDM of Monel K-500 Alloy.
9. Akhilesh Kumar Yadav, PGMSE/1456024, Parametric Optimization & Experimental Analysis of Wire-EDM on Hastelloy C-22 by Taguchi Methods.
10. Padmaker, PGMSE/14560, Parametric Optimization in electrical Discharge Machining of NIMONIC-90.
11. Kamal Kant Sharma, PGWLF1556118, Optimization of process parameters of GTAW on SS 202 by RSM.
12. Kaushal Singh, PGWLF, 1556117, Optimization of spot-welding parameters of SS-316 Sheet using Response Surface Methodology.
13. Vivek Kumar Saw, PGMSE, 1556020, Optimization of Electrochemical machining parameters of Die steel D3 using Response surface Methodology
14. Mahima Saxena, Optimization of process parameters in EDM of nimonic 80a alloy using different electrode materials.
15. Mr. Abhishek kumar, reg no. Pg/mse/1650142, “Optimization and comparative analysis of process parameters of EDM machined on Hastelloy c-276 using cryogenically treated and non-treated copper tool”.16
16.Mr.Rahul Solanki, PGMSE 1750113, Optimization and comparative analysis of process parameters of EDM on nimonic 263 using different cryogenically treated and non-treated tools.
17. Mr.Hemraj Singh, PG/MSE/1750115, Investigations of the effect of process parameters on the surface integrity of nconel-825 machined by EDM.
18. Rajneesh Patel, /PGMSE/1850101, Effect of FDM Process Parameters ON surface roughness and tensile strength of ABS.
19. Pawan Kushwaha, PGMSE/1850107, Effect of FDM Process Parameters ON tensile strength and surface roughness for PLA parts.
20. Vikrant Singh, /PGMSE/1950176, Development and cavitation erosion analysis of (VC+CuNi-Cr) based coating by high velocity oxy fuel(HVOF) Process on SS316 steel.
21. Rajat Vipra, PG/MSE/2150004, Investigation of Slurry Erosion Behavior of Arc Wire Spray Ni-Al and Fe-Cr Coatings prepared on Hydro Machinery SS316.
22. Deepak Kumar
PhD Guided
1. Praveen Kumar, PME-1802, FDM Process Optimize for Polymer Blends.
2. Sonu Ram(PME1807), Some Study on Performance and Emission in a Multi Cylinder SI Engine using Cylinder Deactivation.
Current PhD Scholar-03
1. Arshdeep Singh
2.Vijay Kumar
3. Rajneesh Kumar Verma
Experience-
1. Lecturer, 1997
2. Lecturer (Senior Scale), 2003
3. Assistant Professor, 2008
4. Associate professor, 2011
5. Professor, 2021 to till date
Expert Lectures-
1. ISTE Sponsored STTP SLIET, Longowal – Expert Lecture2. ISTE Sponsored STTP SLIET, Longowal – Guest Lecture 3. ONGC Dehradoon for B.Tech students of modular program run by PTU Jalandhar – Guest Lecture 4. GBP Engg College Ghurdori, Pauri Garwal Uttarakhand 5. Expert Talk – NIT Hamirpur during STC “Sustainable Energy Generation and Environmental Management” Sponsored by MHRD AICTE 6. Expert Talk – AICTE Sponsored STC on “Renewable energy sources” organized by Department of chemical Technology SLIET, Longowal
7. Expert Talk on “Biodiesels : an Energy Substitute”, Renewable energy applications : Practices and challenges December 21-25, 2015 Department of EIE, SLIET, Longowal 8. As Guest Speaker Latest trend in Automobile Engineering and session chair in An International Conference on Research, Skilling and Employability 22 nd to 23 rd February 2017 at Department of Mechanical & Automobile Engineering at Dr. K. N. Modi University Newai, Jaipur, Rajasthan.
9. Expert Talk on “Agriculture waste as fuel for power generation” STC on Evolution in the field of sustainable energy science & Technology 24-28 September 2019 Organised by Department of Mechanical Engineering, BIET, Jhansi (UP) under TEQIP-III
10. Expert Talk on “Biodiesel and hydrogen as sustainable energy source” STC on Evolution in the field of sustainable energy science & Technology 24-28 September 2019 Organised by Department of Mechanical Engineering, BIET, Jhansi (UP) under TEQIP-III
11. Session chair, In 2nd International Conference on “Future Learning Aspects of Mechanical Engineering” (FLAME-2020) 5th to 7th August 2020 (FLAME2020) Organised by Department of Mechanical, Amity University, Noida, UP
12. Expert talk in short term course “Recent Developments in Mechanical Systems” Sept 07- 11, 2020. Mechanical Engineering Department, GBPIET PauriGarhwal, Uttarakhand.
13. Delivered on “Use of Biodiesel As An Alternative Fuel In Ci Engine” AICTE approved ATAL online Faculty Development Programme “Alternate Fuels” September 21-25, 2020 Department of Mechanical Engineering, Faculty of Engineering & Technology, Gurukul Kangri Vishwavidyalaya , Haridwar.
14. Expert Talk on “How to explore entrepreneursh ip opportunities for students” one Week FDP on “OBE Implementation: A step towards excellence” September 19-24, 2020 sponsored under Margdars han2019 (AICTE, Govt. of India).
15. Session chair, 5TH National eConference on Advanced Materials AND Radiation Physics(AMRP2020) November 9-11 2020 Organised by Department of Physics SLIET, Longowal.
16. Session chair, Track-2, Advances in Energy Harvesting In International conference on Futuristic and sustainable Aspects in Engineering and Technology(FSA E T-2020), 18- 19/12/20 20. 19/12/20 20-10.30 am Organised by Department of Mechanical &Civil Engineering, GLA University Mathura.
17. Expert Lecture TEQIP-III RTU(ATU) Sponsored five Days Faculty Development Program on Futuristic Scope for Research in Thermal Engineering 18-22 February 2021 Organised by Department of Mechanical Engineering Arya College of Engineering & IT, Kukas, Jaipur (Rajasthan).
Editor – SRIZAN Editor – Proceeding of the National Seminar on” Emerging Trends in Manufacturing Systems Editor – National Conference on Design Dynamics and Manufacturing Abstracts
1.SLIET Mechanical Engineering Society (SMES)
2. Indian Society for Technical Education (ISTE)
3. Indian Welding (IWS) Society
4. Society of automotive Engineers (India)
5. Society of Energy Engineer &Manager (SEEM).
1. Silver Medal in M.Tech.
2. State Merit Scholarship (1990-1992)
3. National Merit Scholarship (1992-1996)
4. Social Service Award by Punjab Government in 2013
Publication in National/International Journal
Total Papers Published- 46 1. Indraj Singh, Vikas Rastogi, Performance Analysis of a modified 4-Stroke Engine Using Biodiesel Fuel for Irrigation Purpose International nal Journal of Applied Environme ntal Sciences, 2009,Volume-4, Number-2, Page-229- 242. 2. Ashish Malik, Lakhwinder singh, Indraj Singh, Utilization of Biomass as Engine Fuel Journal of Scientific and Industrial research,, 2009, Volume 68, Page-887-890.
3. Singh I., Sahni V.,Performance and Emission Analysis of Compression Ignition Engine Coupled with Electric Generator Set used Bakain Methyl Ester as a Fuel Indian Journal of Science and Technolog y, , Vol 9(33), 4. Singh I., Sahni V.,., Impact of emission on environment of electric generator fuelled with karanja biodiesel adding additive Di-Ethyl EtherNature Environme nt and Pollution Technolog y,, volume 16., No.3 September 2017. 5. Loveleen Kumar Bhagi, Shankar Singh , Indraj Singh, Application of Taguchi method for optimization of continuous drive friction welding process parameters, Ukrainian Journal of Mechanica l Engineerin g and Materials Science , vol. 2, no. 1, 2016. 6. Vipul Kumar, Akhilesh Kumar, Indraj Singh. Review on current research trends in wire-electrical discharge machining Internatio nal Journal of science Technolog y and Manageme nt , vol. 5, no. 1, 2016/101-112. 7. Indraj Singh, Asad Salah, Pandrangi Kalyan,Rohit Kumar Singh, Vikas Verma,Harsh Sharma Design and analysis of a gaming platform with 4 degree of freedom, Internatio nal Journal of Innovative Science and Research Technolog y Vol.6,Issue- 6,2021/671-721. 8. Vikrant Singh, Indraj Singh,Anuj Bansal, Ankita Omer,Anil Kumar Singla,Rampal,Deepak Kumar Goyal Cavitation erosion behavior of high velocity oxy fuel (HVOF) sprayed (VC + CuNi-Cr) based novel coatings on SS316 steelSurface & Coatings Technology Volume 432, 25 February2022, 128052. 9. Praveen Kumar, Pradeep Gupta, Indraj Singh. Parametric optimization of FDM using ANN-based whale optimization algorithm Artificial intelligenc e for Engineerin g Design Analysis and Manufactu ring Published online by Cambridge University Press: 08 August 202210. 10. Praveen Kumar, Pradeep Gupta, Indraj Singh, Performance Analysis of polycarbonate in ABS polymer to fabricate blend filament for FDM printing using hybrid Algorithms Journal of materials engineerin g and performance Springer 32, pages1924– 1937 (2023) 11. Sonu Ram,Raj Kumar Yadav, Indraj Singh, A RSM approach to optimize an Engine performance, combustion and emissions at part load through cylinder deactivationInternational Journal of Automotive technology, Vol. 24, No. 5, 2023. 12. Sonu Ram. Raj Kumar Yadav, Indraj Singh, Engine adaptation to improve performance, combustion and emission at low load by cylinder deactivation, Journal of the Brazilian Society of Mechanical Sciences and Engineering Springer,Vol. 45, No. 9, 2023 13. Praveen Kumar, Pradeep Gupta, Indraj Singh, Optimisation of extrusion process parameters to make ABS-PC filament for 3D printing using Taguchi-GRA technique. https://doi.org/10.1080/2374068X.2023.2204458, Advances in Materials and Processing Technologies Taylor & Francis Published online: 28 Apr 2023. 14. Sonu Ram. Raj Kumar Yadav, Indraj Singh, Combustion and Exhaust Emission Improvement in a 3- cylinder MPFI Engine through downsizing, U. Porto Journal of Engineering, Vol. 9, No. 3, 2023. 15. Padmakar, Indraj Singh, J.S.Gill, Amrik Singh, Parametric Optimization of Electrical Discharge Machining on Nimonic 90, Industrial Engineering Journal, vol.15,Issue 6,6 June 2022. 16. Rajat Vipra, Vikrant Singh, Indraj Singh, Ankita Omer, Anuj Bansal, Jonny Singla, Anil Kumar Singla, Akash Tiwari and Deepak kumar Goya, slurry erosion behaviour of Ni-Al and Fe-Cr Coatings Deposition by Arc Wire Spray on Hydro Machinery SS316 Steel, Journal of Mechanical Engineering and Performance, https://doi/10.1007/s11665-023-08818-0., 23.09.23. 17. Praveen Kumar, Pradeep Gupta, Indraj Singh, Empirical study on thermomechanical properties of 3D Printed green renewable and sustainable Acrylonitrile Butadiene Styrene/Polyactic Acid Blended Parts, Journal of Mechanical Engineering and Performance, https://doi/10.1007/s11665-023-08648-0, (12 August 2023). 18.Praveen Kumar, Rajneesh Patel, Indraj Singh, Sanat Agrawal, John D. Kechagias, Optimising the fused filament fabrication process employing the experimental design approach: An expository paradigm under cold weather conditions and lightweight specimens, Journal Next Materials, http://www.sciencedirect.com/journal/next-materials. Volume 7, April 2025, 100387.
Research papers in National/ International Conferences
1 .Indraj Singh, Design Construction and Operation of a Bio Gas Digestor, National Conferences on Emerging Technologies for Efficiency Improvement in Energy Sector. Organized by Department of Electrical &Instrumentation SLIET, Longowal November 8-9, 2003. 2. Indraj Singh, Fundamental of Weld Cladding, National Conferences Emerging Trends in Manufacturing systems. Organized by Department of Mechanical Engineering SLIET, Longowal, January 18-19 2004 3. Indraj Singh, Development of Hydro power in India, National Conferences Emerging Scenario in Hydro-Thermal Power. Organized by Department of Electrical &Instrumentation SLIET, Longowal. September 15 2004. 4. Indraj Singh, Bulk Welding An Approach of Saving Wire And Flux In Submerged Arc welding: A Review. National Symposium National Symposium on Welding Technology. Organized by Department of Mechanical Engineering SLIET, Longowal. 24-25 February 2006. 5. Indraj Singh, Production Methodology and Chemical Analysis of sunflower based bio diesel: A view point. International Conferences International Conference on Molecules to Materials. Organized by Department of Chemistry SLIET, Longowal. March3-4-2006. 6. Indraj Singh, Just In Time Manufacturing and Allied System, National Conferences NITTTR Chandigarh. 24 March2006. 7. Indraj Singh, Design of Software for Integration of Manufacturing Activities, National Conferences NITTTR Chandigarh. 24 March2006 8. Indraj Singh, An approach of Replacing conventional fuel by different Bio mass Fuels using Down Draft Gasifiers. National Conferences National Conference on Design Dynamics and Manufacturing. Organized by Department of Mechanical Engineering SLIET, Longowal. 16-17 March 2007. 9. Indraj Singh, Hydrates of Methane as Fuel, National Conferences Advances in Chemical Engineering. Organized by Department of Chemical Technology SLIET, Longowal. 26-27 March 2007. 10. Indraj Singh, Scheduling and Routing issues in FMS: several case studies of Indian industries, National Conferences CPIE at Organized by Department of Mechanical Engineering NIT Jalandhar. 22-24 march 2007. 11. Indraj Singh, Simulation of Tolerance Analysis &yield estimation of Mechanical Assemblies-A case study. National Conferences CPIE at Organized by Department of Mechanical Engineering NIT Hamirpur (HP). 13-14 November 2008. 12. Indraj Singh, Saving of Diesel Fuel in Generating Power by Using of Different Biomass Fuels on Down Draft Gasifier, International Conferences, On Renewable Energy Asia-2008.Organized by SEE Forum and IIT Delhi, December 11-13, 2008. 13. Indraj Singh, Fuel properties of Biodiesel 1st International conference on New Frontiers in Biofuels 18 19, January 2010, Mechanical Engineering Department, DTU, Delhi, International Conference. 14. Indraj Singh, Investigation of fuel properties of biodiesel & its blends by adding Additives, 7th international symposium on fuel and lubricants (ISFL-2010) 9-12 March 2010 Indian oil, Faridabad. 7th International symposium. 15. Indraj Singh, Analysis of fuel properties of karanja oil and its Biodiesel National Conferences on waste Management & Recycling (WMR- 2011) 9- 10, December 2011 Department of Chemical Engineering, SLIET, Longowal National Conferences. 16. Indraj Singh, Potential of LPG Replacement with Biogas Produce from Kitchen Waste, National Conference on Advancements in Mechanical Engineering and Energy Environment,6-7Jan,2012. Page no. 57. 17. Indraj Singh, Use of Biogas for Cooking Purpose in a Technical Institute: A View Point, National Conference on Trends & Advances in Mechanical Engineering, Oct 19 ,2012 . Page no. 12. 18. Indraj Singh, Use of Biomass for Power Generation in Rural Area, 2nd National Conference on Recent Advances in Mechanical Engineering (NCRAME-2014) G.B. Pant Engineering College, Pauri-Garhwal, Uttarakhand -246194, 26 and 27 October 2014. 19. Indraj Singh, Economic Base Comparative study of different biogas digester for a Technical Institute 2nd National Conference on Recent Advances in Mechanical Engineering (NCRAME-2014) G.B. Pant Engineering College , Pauri-Garhwal, Uttarakhand -246194, 26 and 27 October 2014. 20. Prem Kumar, Indraj Singh, Performance Evaluation of Waste Cooking Biodiesel and its blends on Diesel Engine, International conference on “Advances in power generation from renewable energy sources” (APGRES 2015), June 15-16 2015, at Rajasthan Technical University, Kota, India-324010,Page-268-273. 21. Singh I., Sahni V., Electric Power Generation Using Jatropha Biodiesel and Its Blend as Fuel in CI Engine for Rural Area, Annual conference on life science and engineering(ACLSE-2015), 25-27/8/2015, at Osaka, Japan. 22. Singh I., Sahni V., Performance Analysis of Compression ignition engine using karanja biodiesel with additive di ethyl ether, int’l conference on aeronautical, automotive and manufacturing engineering (icaame’2015) august 25-26, 2015, at Kuala Lumpur, Malaysia. 23. Indraj Singh, “Energy Conservation in Diesel Engine” one-day technical seminar of Back your PAT on sound energy audit,26 August 2016., Organised by Society of Energy Engineers and Managers, in Chandigarh National Seminar. 24. vivek Kumar, Indraj Singh, A Review on parametric optimization of electrochemical machining of Die-steel-A Review, An International Conference on Research, Skilling and Employability 22 nd to 23 rd February 2017, organised by Department of Mechanical & Automobile Engineering at Dr. K. N. Modi University Newai, Jaipur, Rajasthan. International
25. Indraj Singh, Optimisation of Gas tungsten ARC welding on steel- A Review, An International Conference on Research, Skilling and Employability 22 nd to 23 rd February 2017, organised by Department of Mechanical & Automobile Engineering at Dr. K. N. Modi University Newai, Jaipur, Rajasthan. 26. Indraj Singh, Role of Teacher in Modern Technical Education National Conference on Education Transforms Lives(ETL-2018) 5th-6th September 2018 Department of Management & Humanities, (TEQIP-III Twining SLIET, Longowal National Conference. 27 . Indraj Singh, Zero Emission International Training Workshop on “INDUSTRY 4.0 AND ENERGY MANAGEMENT” 19-20, January 2022 Centre for science &Technology of the Non-Aligned and other Developing countries (NAM S&T) New Delhi and SEEM Trivandrum, Kerala(India) International Training Workshop.
28. Sonu Ram, Indraj Singh, Impact of cylinder deactivation on part-load combustion characteristic. 27ᵗʰ National Conference on Internal Combustion Engines and Combustion. 5-7 November, 2022 organized by Automotive Research Centre, VIT, Vellore under the aegis of the Combustion Institute – Indian Section (CIIS), National Conference.
1. Dr. S.K. Mohapatra, Dr. Indraj Singh. Modernization of IC Engine lab using Gaseous fuels like CNG, LPG, and to popularize these fuels in rural and urban areas, MHRD, 2002-2004, CO-PI,10 Lacs.
Copyright © 2024 , Sant Longowal Institute of Engineering and Technology, Longowal - 148106 Distt. Sangrur, Punjab, India Developed & Maintained by Administrative Computer Services System (A.C.S.S), SLIET