Dr. Anuj Bansal
Assistant Professor
Mechanical Engineering
01672-253727
01672-233344
7508444725
anujbansal@sliet.ac.in and anujbansalsliet@gmail.com
Ph.D. (Mechanical Engineering), SLIET, Longowal, January 2021
M.E. (Thermal Engineering), Thapar University, Patiala. July 2012
B.Tech (Mechanical Engineering), BBSBEC, Fatehgarh Sahib. June 2010
1. Working in SLIET, Longowal as Assistant Professor since 7 Jan, 2014. 2. Worked as Assistant Professor in LPU, Jalandhar from 1 Aug, 2012 to 30 April, 2013.
BOOK CHAPTER – 03
Bansal A., Singla J., Pandey S., and Raj P. (2020), “DESIGN AND DEVELOPMENT OF HIGH-VELOCITY SUBMERGED WATER JET CAVITATION EROSION TEST RIG” In: Sharma V., Dixit U., Sørby K., Bhardwaj A., Trehan R. (eds) Manufacturing Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. ISBN: 978-981-15-4619-8, pp. 85-93. (Scopus- indexed). Singh A., Bansal A., Singh J., and Singla A.K. (2020), “EFFECT OF CRYOGENIC TREATMENT ON MECHANICAL AND METALLURGICAL PROPERTIES OF SS410” In: Sharma V., Dixit U., Sørby K., Bhardwaj A., Trehan R. (eds) Manufacturing Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, ISBN: 978-981-15-4619-8, pp. 221-229. (Scopus- indexed). Upadhyay J., Bansal A., and Singh J. (2018), “EFFECT ON MECHANICAL AND METALLURGICAL PROPERTIES OF CRYOGENICALLY TREATED MATERIAL SS316” In: Sharma V., Dixit U., Alba-Baena N. (eds) Manufacturing Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, ISBN: 978-981-13-6287-3, pp. 97-108. (Scopus- indexed).
Title: A PORTABLE MUD BASED CURVY AND CONE HEAT SINKER SYSTEM FOR OUTDOOR AIR CONDITIONER UNIT Application Number: 202211037172 Inventors: Anuj Bansal, Jonny Singla, Anil Kumar Singla, Deepak Kumar Goyal, Jagtar Singh Status: Published
Title: A PORTABLE APPARATUS FOR CLEANSING FRUITS AND VEGETABLES AND METHOD THERE OF Application Number: 202011034056 Inventors: Dhiraj Sud, Anil Kumar Singla, Anuj Bansal Status: Published (under examination)
SCI JOURNAL PAPERS – 10
Bansal, A., Singh, J. Singh, H., and Goyal D.K. (2021). ‘INFLUENCE OF THICKNESS OF HYDROPHOBIC POLYTETRAFLUOROETHYLENE (PTFE) COATINGS ON CAVITATION EROSION OF HYDRO-MACHINERY STEEL SS410’ Wear (In Press). https://doi.org/10.1016/j.wear.2021.203886. Singla A.K., Banerjee M., Sharma A., Singh J., Bansal A., Gupta M.K., Khanna N., Shahi A.S., and Goyal D.K. (2021). ‘SELECTIVE LASER MELTING OF TI6AL4V ALLOY: PROCESS PARAMETERS, DEFECTS AND POST-TREATMENTS’ Journal of Manufacturing Processes, Vol 64, 161-187. https://doi.org/10.1016/j.jmapro.2021.01.009 Pandey S., Bansal A., Omer A., Singla A.K., Goyal D.K., Singh J., and Gupta M.K. (2021). ‘EFFECT OF FUEL PRESSURE, FEED RATE, AND SPRAY DISTANCE ON CAVITATION EROSION OF RODOJET SPRAYED AL2O3+ 50% TIO2 COATED AISI410 STEEL’ Surface and Coatings Technology, Vol 410, 126961. https://doi.org/10.1016/j.surfcoat.2021.126961. Bansal, A., Goyal, D. K., Singh, P., Singla, A. K., Gupta, M. K., Bala, N., Kolte, J., and Setia, G. (2020). ‘EROSIVE WEAR BEHAVIOUR OF HVOF-SPRAYED NI-20CR2O3 COATING ON PIPELINE MATERIALS’, International Journal of Refractory Metals and Hard Materials, Vol 92, 105332. doi:10.1016/j.ijrmhm.2020.105332. Bansal, A., Singh, J., and Singh, H. (2020) ‘EROSION BEHAVIOR OF HYDROPHOBIC POLYTETRAFLUOROETHYLENE (PTFE) COATINGS WITH DIFFERENT THICKNESSES’, Wear, Vol 456–457, 203340. https://doi.org/10.1016/j.wear.2020.203340. Bansal, A., Singla, A. K., Dwivedi, V., Goyal, D. K., Singla, J., Gupta, M. K., and Krolczyk, G. M. (2020) “INFLUENCE OF CRYOGENIC TREATMENT ON MECHANICAL PERFORMANCE OF FRICTION STIR AL-ZN-CU ALLOY WELDMENTS”, Journal of Manufacturing Processes, Vol 56, 43–53. https://doi:10.1016/j.jmapro.2020.04.067. Singh, S., Goyal, D. K., Kumar P. and Bansal A. (2020) “LASER CLADDING TECHNIQUE FOR EROSIVE WEAR APPLICATIONS: A REVIEW”, Mater. Res. Express, Vol 7(1), 012007. https://doi.org/10.1088/2053-1591/ab6894 Bansal, A., Singh, J. and Singh, H. (2019) “SLURRY EROSION BEHAVIOR OF HVOF-SPRAYED WC-10CO-4CR COATED SS 316 STEEL WITH AND WITHOUT PTFE MODIFICATION”, Journal of Thermal Spray Technology., Vol 28 (7), 1448-1465. https://doi.org/10.1007/s11666-019-00903-y Singh, P., Bansal, A., and Goyal, D. K., (2019) “EROSION WEAR EVALUATION OF HVOF SPRAYED WC-12CO COATING ON SOME PIPELINE MATERIALS USING TAGUCHI APPROACH”, Kovove Mater., Vol 57(2), 113–120. Bansal, A., Mallick, S.S., and Wypych, P. W. (2013), “INVESTIGATING STRAIGHT-PIPE PNEUMATIC CONVEYING CHARACTERISTICS FOR FLUIDIZED DENSE-PHASE PNEUMATIC CONVEYING”, Particulate Science and Technology: an international journal, 31 (4), 348-356. https://doi.org/10.1080/02726351.2012.732677.
SCOPUS PAPERS – 02
Thakur A., Singh G., Minhas N., Sharma V., and Bansal A. (2021). ‘3D MODELING AND EXPERIMENTAL INVESTIGATION FOR TOOL DEFLECTION IN END MILL CUTTING OF AISI 1045’ Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.11.731 Bansal, A., Singh, J., and Singh, H. (2021) ‘INVESTIGATING SLURRY EROSION BEHAVIOR OF A HYDRO-MACHINERY STEEL UNDER VARIOUS IMPINGEMENT VARIABLES’ Materials Today: Proceedings, Vol 4(4) 795-800. https://doi.org/10.1016/j.matpr.2020.08.747
REFERRED JOURNAL PAPERS – 01
Sharma, M., Goyal, D. K., Bansal, A., and Bala, N. (2017), “MODE-BASED DYNAMIC ANALYSIS ON MACHINE STRUCTURE SUBJECTED TO FREE VIBRATION ANALYSIS”, Journal of Emerging Trends in Engineering, Science and Technology, ISSN: 2394-5354, Vol 5 (1), 9-15.
INTERNATIONAL CONFERENCE PAPERS – 11
NATIONAL CONFERENCE PAPERS – 02
https://www.researchgate.net/profile/Anuj-Bansal-5
Research Area: Wear, Surface engineering, Thermal spray & Hydrophobic coatings, Additive Manufacturing and Cryogenic treatments
Project Completed: 01
Research Project title “DESIGN AND DEVELOPMENT OF CAVITATION TEST RIG TO ANALYSE THE CAVITATION EROSION OF HYDRO-MACHINERY STEELS UNDER SURFACE MODIFICATIONS” worth Rs. 1,00,000/- sanctioned under TEQIP-III (Subcomponent 1.3.2.5) on dated 26/03/2019 vide reference number SLIET/Dean (R&C)/2019/693 (PI: Anuj Bansal) (Completed)
M. Tech. Guided: 11
Mr. Varinder Singh; M. Tech. (Manufacturing System Engineering) Thesis entitled “Effect of Deep Cryogenic Treatment on the various properties of Austenitic Manganese Steel used as Crusher Hammer” from SLIET, Longowal, Sangrur, India in the year 2015. Mr. Vinay Dwivedi; M. Tech. (Welding and Fabrication) Thesis entitled “Effect on some mechanical properties of Friction Stir Welded Al 7050T-7451 by varying process parameters” from SLIET, Longowal, Sangrur, India in the year 2016. Mr. Shyam Bihari; M. Tech. (Manufacturing System Engineering) Thesis entitled “Effect of Cryogenic Treatment on the slurry erosion behaviour of impeller material SS 304L” from SLIET, Longowal, Sangrur, India in the year 2017. Mr. Praveen Kumar Saini; M. Tech. (Welding and Fabrication) Thesis entitled “Optimizing D-Gun process parameters of Al2O3-TiO2 coating on AISI410 for slurry erosion” from SLIET, Longowal, Sangrur, India in the year 2018. Mr. Jitendra Upadhyay; M. Tech. (Manufacturing System Engineering) Thesis entitled “Investigating slurry erosion behaviour of Cryogenically Treated hydro machinery steel SS316” from SLIET, Longowal, Sangrur, India in the year 2018. Mr. Brijesh Kumar Gupta; M. Tech. (Manufacturing System Engineering) Thesis entitled “Investigating corrosion behaviour of PTFE modified thermal spray coated hydro-machinery steels” from SLIET, Longowal, Sangrur, India in the year 2018. Mr. Amrinder Singh; M. Tech. (Manufacturing System Engineering) Thesis entitled “Effect of Cryogenic Treatment on the slurry erosion behaviour of hydro turbine material SS410” from SLIET, Longowal, Sangrur, India in the year 2019. Mr. Prem Raj; M. Tech. (Manufacturing System Engineering) Thesis entitled “Investigation of cavitation erosion behaviour of PTFE coated hydro-machinery steel SS316” from SLIET, Longowal, Sangrur, India in the year 2019. Mr. Shivam Pandey; M. Tech. (Manufacturing System Engineering) Thesis entitled “Investigation of cavitation erosion behaviour of (Al2O3+TiO2) coating by thermal spray process on hydro-machinery steel SS410” from SLIET, Longowal, Sangrur, India in the year 2019. Mr. Shankar Kumar; M. Tech. (Welding and Fabrication) Thesis entitled “Investigation on cavitation erosion behaviour of WC+NiCr coating using laser cladding process on hydro-machinery steel SS304” from SLIET, Longowal, Sangrur, India in the year 2021. Mr. Prashant Shukla; M.Tech. (Manufacturing System Engineering) Thesis entitled “Performance Analysis of Design and Fabricated Rice Dryer under Different Operating Conditions” from SLIET, Longowal, Sangrur, India in the year 2021.
Copyright © 2024 , Sant Longowal Institute of Engineering and Technology, Longowal - 148106 Distt. Sangrur, Punjab, India Developed & Maintained by Administrative Computer Services System (A.C.S.S), SLIET